posted by Ahijoy on  September 14, 2022

Heat Press Temperature Guide For Vinyl

Have you found the right guide for heat press temperature? This is the right place to provide the best guide for heat press temperature. Vinyl applications need to be applied to products with adequate heat and pressure to make the transfer adhere properly. 

Adding heat transfer vinyl to shirts is not simple. As a result, it requires experience, dedication, and knowledge. 

It would help if you covered all aspects of your business when it turns from a craft hobby to a full-blown business. Among them is mastering the correct Time and temperature settings for HTVs.

Heat Press Temperature Guide For Vinyl

It is why we've developed heat press temperature guides for HTV. The temperature and Time for each HTV product are  260 Degrees Fahrenheit To 315  Degrees Fahrenheit  130 Degrees Celsius To 160 Degrees Celsius . There are different patterns and textures for heat transfer products. The time and heat settings are different because other materials are thicker or thinner. 

Temperature Chart For Heat Press

  • Multipurpose Material: 350 Degrees Fahrenheit
  • Sublimated (Polyester) Material: 270 Degrees Fahrenheit
  • Stretch (Swimming Gears) Material: 335 Degrees Fahrenheit
  • The Material In Full Color: 350 Degrees Fahrenheit
  • Vintage: 350 Degrees Fahrenheit
  • High Textured: 350 Degrees Fahrenheit
  • Garments: 365 and 375 Degrees Fahrenheit
  • Glowing In The Dark: 350 Degrees Fahrenheit

Please print out this cheat sheet and pin it to your workspace. It's the Time and temperature of the heat press that requires careful planning. You must adjust the temperature and pressure when using the heat press. Additionally, you have to choose a temperature for removing the carrier paper. 

Every heat transfer vinyl has different pressing times, temperatures, pressures, and peels! 

Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl
Chameleon Heat Transfer Vinyl
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy

Chameleon Heat Transfer Vinyl

€5,95
View Details

Guide Of Temperatures For Different Materials In A Heat Press

Ensure your machine has the right temperature and heat. The type of material you're using is essential.

Multipurpose Material

If the product is Multi-Purpose, The multipurpose material is a bestseller and is suitable to be used in various ways for design purposes. Consequently, if you use the above printing method on multipurpose material, you can achieve an excellent result.

  • Temperatures of 350 degrees Fahrenheit should be used
  • It is best to set the timer for 10-12 seconds.

Sublimated (Polyester) Material

Polyester sublimated (polyester) materials shouldn't be used at high temperatures because polyester materials don't like high temperatures. Therefore, it is a good idea:

  • The ideal setting for the heater is 270 degrees Fahrenheit
  • You have set your heat press for 10 seconds
  • It is only possible to peel it when it is warm
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy

Basic Color Puff Heat Transfer Vinyl

€5,95
View Details

Stretch (Swimming Gears) Material

Due to the stretchiness of the material that you want to print on, you should do the heat transfer as follows:

  • A temperature of 335 degrees Fahrenheit where necessary
  • Timing: 12-14 seconds
  • Peel: Cold

The Material In Full Color

Guidelines to follow when printing in full color

  • 350 degrees Fahrenheit is the ideal temperature
  • A good time is between 10 and 12 seconds
  • The only time you can peel is when it's hot
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl
Chameleon Heat Transfer Vinyl
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Chameleon Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy

Chameleon Heat Transfer Vinyl

€5,95
View Details

Vintage Style

You can achieve the Vintage look by following these steps to achieve the old and faded look.

  • Set the temperature to 350 degrees Fahrenheit
  • Time: 10- 12 seconds
  • Bring it out while it is still hot to get the best results.

High Textured

Follow these steps for your heat transfer when printing a high texture design and you want the glitter to show:

  • 350 degrees Fahrenheit should be the temperature setting
  • Duration: 15 seconds
  • Make sure that the peel is hot when you're going to use it
Buffalo Plaid Heat Transfer Vinyl
Buffalo Plaid Heat Transfer Vinyl
Buffalo Plaid Heat Transfer Vinyl
Buffalo Plaid Heat Transfer Vinyl
Buffalo Plaid Heat Transfer Vinyl
Buffalo Plaid Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Buffalo Plaid Heat Transfer Vinyl
Buffalo Plaid Heat Transfer Vinyl
Buffalo Plaid Heat Transfer Vinyl
Buffalo Plaid Heat Transfer Vinyl
Buffalo Plaid Heat Transfer Vinyl
Buffalo Plaid Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Buffalo Plaid Heat Transfer Vinyl

Buffalo Plaid Heat Transfer Vinyl

€5,95
View Details

Garments

Therefore, if you are using heat transfers on garments, follow these settings;

  • Set the temperature between 365 and 375 degrees Fahrenheit
  • The Time is 10-12 seconds
  • It is best to bring it out while it is still hot
Heat Press Temperature Guide For Vinyl

Glowing In The Dark

To design something unique, such as the Glow in the Dark-type, which will still illuminate when exposed to light, you need to follow these steps;

  • 350 degrees Fahrenheit is the temperature setting
  • 10-12 seconds is the Perfect Time

How To Set The Time And Temperature Settings Of The Heat Press

  • Determine the material to be printed.
  • Set up your heat press machine according to manufacturer's instructions.
  • Place the material on a heat press platen that is preheated to the desired temperature.
  • Set your timer for 30 seconds and press down firmly on the material for 30 seconds. Lift up and check your design. If it is not completely transferred, repeat the steps again until you achieve full transfer or until your timer expires .

Problems Associated With Heat Transfer Vinyl Printing

It's not unusual to encounter problems when printing many shirts and using different types of heat press vinyl. While you may want everything to run smoothly, problems will always arise. Here are some common issues encountered when using heat transfer vinyl in printing.

The Heat Transfer Doesn't Stick To The Shirt Or Fabric

To properly adhere to the design, the right amount of heat, Time, and pressure are needed. Therefore, focus on timing rather than pressure, which is the most critical part. Applying more pressure to the heat transfer is essential to make it stick. 

If you raise the temperature right away, you might lose the transfer's quality or affect the quality of the t-shirt. You should also follow the instructions, which will tell you what temperature and how long you should press the plastisol print onto your t-shirt.

After Cooling Down, Wrinkles Appear.

T-shirts shrink after washing, causing the vinyl to wrinkle. To prevent this, prewash the shirt before doing the heat transfer. If you don't like to prewash clothes, you can always use pre-shrunk t-shirts. Pre-shrunk t-shirts may still shrink after washing, but the shrinking will be minimal, and the print will not wrinkle.

Heat transfer wrinkling is also avoidable by being more careful. Applying vinyl to a flat, straight, and not too stretched garment is essential. It might also wrinkle if you don't stretch the shirt enough before pressing. The vinyl print must also dry before washing.

PU Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
PU Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Colors Heat Transfer Vinyl
PU Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Colors Heat Transfer Vinyl
Basic Colors Heat Transfer Vinyl
Basic Colors Heat Transfer Vinyl
PU Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Colors Heat Transfer Vinyl
PU Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
PU Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Colors Heat Transfer Vinyl
Basic Colors Heat Transfer Vinyl
Basic Colors Heat Transfer Vinyl
PU Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Colors Heat Transfer Vinyl
Basic Colors Heat Transfer Vinyl
Basic Colors Heat Transfer Vinyl
Basic Colors Heat Transfer Vinyl
Basic Colors Heat Transfer Vinyl
PU Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Colors Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Colors Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Colors Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Colors PU Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Colors Heat Transfer Vinyl
Basic Colors Heat Transfer Vinyl
PU Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Colors Heat Transfer Vinyl
PU Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Colors Heat Transfer Vinyl
PU Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Colors Heat Transfer Vinyl
Basic Colors Heat Transfer Vinyl
Basic Colors Heat Transfer Vinyl
PU Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Colors Heat Transfer Vinyl
PU Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
PU Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Colors Heat Transfer Vinyl
Basic Colors Heat Transfer Vinyl
Basic Colors Heat Transfer Vinyl
PU Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Colors Heat Transfer Vinyl
Basic Colors Heat Transfer Vinyl
Basic Colors Heat Transfer Vinyl
Basic Colors Heat Transfer Vinyl
Basic Colors Heat Transfer Vinyl
PU Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Colors Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Colors Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Colors Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Colors PU Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Colors Heat Transfer Vinyl
Basic Colors Heat Transfer Vinyl

Basic Colors Heat Transfer Vinyl

€4,95
View Details

Polyester Or Sublimated Fabrics Turn Yellow After Pressing.

Vinyl heat transfer printing allows you to print designs onto fabrics. This process can be used on any fabric but is beneficial for light-colored fabrics such as polyester or sublimated fabric. Heat transfer vinyl printing works by applying heat to the material, which causes the ink to be absorbed into the fibers. 

The main issue with heat transfer vinyl printing is that if the fabric is pressed too hard, it can cause scorching or yellowing of the material. Fabrics are not suitable for printing at high temperatures or the press has a high temperature.

 In particular, light-colored fabrics such as polyester or sublimated fabric turn yellow or scorched after pressing. You may find any other fabric at low temperatures within the required range.

Initially, Vinyl Sticks And Peels Off After A While, Especially With Multilayered Vinyl.

Vinyl is a very durable product. It sticks initially and then falls off after a while, especially for multi-layered vinyl. Vinyl that sticks initially and then falls off after a while is caused by the vinyl not being warm enough to stick. This is most commonly an issue for multi-layered vinyl. The solution is simple make sure your printer is set to print a warm peel or hot peel type of vinyl.

Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy
Basic Color Puff Heat Transfer Vinyl - Heat Transfer Vinyl - Ahijoy

Basic Color Puff Heat Transfer Vinyl

€5,95
View Details

Several Factors Affect The Right Temperature And Time Settings

The right temperature and time settings for a heat press depend on the material that you are pressing, as well as the type of design that you are using.

Polyester Or Sublimated Fabric

For polyester and sublimated fabric, the recommended temperature is between 250°F and 300°F. If you want to use an iron-on transfer, it should be pressed at 325°F for 10 seconds.

Heat Press Temperature Guide For Vinyl

Cotton

If you are using cotton as your base fabric, then you will want to set your temperature at 380°F for 15 mintunes.

Stretch Material

When pressing stretch material such as spandex or lycra, set your temperature at 375°F and press for 20 seconds per side. If you are using an iron instead of a heat press, set it at 330°F and press for 12 seconds per side until the print has transferred completely onto the fabric.

Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl
Glitter Heat Transfer Vinyl

Glitter Heat Transfer Vinyl

€5,95
View Details

Glitters

Glitters should be pressed at 340°F for 15 seconds, then cooled to room temperature. This will prevent the glitter from sinking into the vinyl and smudging on the surface of your design.

Metallic Finish

Metallic finish can go up to 320°F for 20 minute. Metallic HTV can be applied to both stretch and non-stretch materials.

Liquid error (sections/pf-6a190f79 line 471): product form must be given a product

Frequently Asked Questions

Final Thoughts

In this blog, we discuss some features of a popular htv and show a temperature chart for how to set the Time. It may seem effortless to apply a graphic design to material. It is not so easy to do a perfect job if you follow the instructions and manual steps. Transferring using a heat press is a little complicated at first.

It won't be easy to achieve this if you do not understand how the heat press machine works. It is necessary to set the temperature correctly, apply the pressure properly, and determine the material's temperature range

A perfect printing experience requires the right temperature, Time, and firm pressure. Additionally, it determines the HTV sizing of your shirt. Further, it would help if you mirrored HTV before cutting it on your Cricut machine.

You now have the basic chart for each type of fabric. This guide covers every situation you may encounter during the process of heat pressing. So you won't have to guess anymore, enhancing your productivity. The transfers will be much better because you'll work with the correct settings.

Liquid error (sections/pf-6a190f79 line 513): product form must be given a product

Related Posts

How To Put Vinyl On A Cup? 

Apr 11, 2023 Shopify API